skip to Main Content




电话: +852 2394 1852
公司地址: 香港九龙湾临乐街19号南丰商业中心1503-05室


852-2394 1852

Bed Leaving Sensor


Product Features

  • Consists of the bridge structure of Piezo Film and medical grade plastic case.
  • Detect of bed leaving and monitor of heart beat rate.
  • Report of battery level status.
  • With built-in rechargeable Lithium battery (with USB cable for battery charging.)
  • The sensor is for Indoor use. It is suitable for pillow or mattress (spring, sponge, coir, latex or complex material type) with thickness between 150mm and 300mm.
  • Detection of leaving bed: auto update after status changed for 15~30 seconds, depends on the network quality.
  • The sensor will use WIFI communication to access internet. The reported bed leaving status & heart beat rate information will be updated to a designated webpage. By visit the designated webpage, the reported bed leaving status & heart beat rate information can be obtained.


Technical Data

  • Physical Dimensions: 110mm x 110mm x 13mm
  • Weight < 200g
  • Power supply: Medical grade 5V power supply and 3.7V Lithium rechargeable battery
  • Life time of battery: 5-10 years
  • Power dissipated: 50mW (peak value) and 6mW (average)
  • Battery life > 500 hours
  • Communication frequency: 2.4 GHz wireless
  • Radiation Power: 1mW (peak value) and 1-3 uW (average)

Working Conditions

  • Temperature: 5°C – 40°C
  • Relative humidity: less than 80%
  • Voltage of power supply
  • Sensor: 3.7V Lithium rechargeable
  • Battery: power from charger DC 5V/2A
Back To Top